VRX928RVD
47
English
Owner’
s manual
VISUAL Operations
Front image
(receiver
screen)
Rear monitor
image
(separately
sold)
Vehicle speaker
sound
Image of device
connected to the
Visual 2 terminal
(
∗
3)
Image of device
connected to the
NAVI or RGB
terminal
Image of device
connected to the
Visual 2 terminal
(
∗
3)
Displays image of
mode selected
using the [FUNC]
button
Image of device
connected to the
Visual 2 terminal (
∗
3)
or NAVI/RGB terminal.
Image of device connected to the
Visual 1 terminal
Displays image of
mode selected
using the [FUNC]
button (
∗
2)
Plays sound of mode selected using the [FUNC] button
2 ZONE
Front monitor lock
Visual 2 connection
[OTHERS]
NAVI connection
[CLARION], [RGB], [COMPOSITE]
Rear monitor
lock
3 ZONE
(
∗
1)
∗
1 A device connected to the Visual 2 or NAVI/RGBterminal should be set up as described in the sec-
tion “Switching Connect.”
∗
2 No image is displayed on the rear monitor when a non-image mode such as radio, DAB, CD, etc. is
engaged.
∗
3 For safety reasons, this image is not displayed when the vehicle is moving. The picture can be
watched only when the vehicle is standing still and the parking brake is engaged.
∗
4 When you connect a clarion Navigation to the unit, connect the cables provided with the navigation
unit to the NAVI terminal and the RGB terminal at the same.
●
Lock system monitor image and sound
2-ZONE: 1 (front monitor lock)
1. Press the [N/A] button.
2. Press the [FUNC] button to select the de-
sired mode.
3. To cancel the monitor lock, press the [N/A] button.
The screen shows the image of the selected
mode.
∗
When the front monitor lock is engaged,
[MENU], [LIST], [KEY PAD], [ADJ] and [A-M]
button cannot be used. Cancel the monitor
lock when you wish to use these buttons. (Ex-
cept when a clarion navigation unit is con-
nected to the unit)
2-ZONE: 2 (rear monitor lock)
1. Press the [ADJ] button to display the AD-
JUST MODE menu.
2. Touch the [REAR MONI LOCK] key and the
[ON] key.
3. Touch the [RTN] key or press the [ADJ] but-
ton.
4. To cancel the monitor lock, press [ADJ] but-
ton, touch the [REAR MONI LOCK] key and
the [OFF] key.
5. Touch the [RTN] key or press the [ADJ] button.
The monitor lock is now canceled.
Locking the front monitor and rear
monitor (3-ZONE)
1. Lock the rear monitor by performing the in-
structions in steps 1 to 3 above.
2. Press the [N/A] button to lock the front monitor.
3. Press the [FUNC] button.
The image for the selected mode is dis-
played for about 5 seconds after which the
front monitor lock image is displayed.
4. To cancel the monitor lock, press the [N/A]
button.
5. To cancel the rear monitor lock, press the
[ADJ] button, touch the [REAR MONI LOCK]
key and the [OFF] key.
