MS850 Installation Manual - Page 11
Convenience Mode
This mode will configure the system to Arm and Disarm on separate buttons for convenience
and ease of use.
Button 1 Arms the system. This Button also locks the doors when the system is in Valet
Mode.
Button 2 Disarms the system
and controls the system’s Auxiliary Function. This button also
unlocks the doors when the system is in Valet Mode.
If the system is Armed, pressing Button 2 Disarms the system.
If the system is Disarmed, pressing Button 2 activates the Auxiliary Function.
When Buttons 1 and 2 are pressed
together, the systems Chirp confirmation setting will be
reversed.
If the system was programmed to arm the system
with chirp, Pressing Buttons 1 and 2 together will arm the
system
without chirp.
If the system was programmed to arm the system
without chirp, pressing Buttons 1 and 2 together will arm the
system
with chirp.
Driver Door Priority Mode
This mode operates in a similar manner as the
Convenience Mode, with the added safety of
unlocking just the driver’s door when the system is disarmed. Pressing Button 2 again will
unlock the remaining doors.
To properly utilize the Driver Door Priority Mode, the alarm must be wired so that the Auxiliary
Function output is wired to a relay that controls the drivers door lock actuator. See
Driver
Door Priority Wiring Diagrams.
F1
ARM
DISARM
BUTTON 1
BUTTON 2
installation_850.qxd 9/10/99 6:26 PM Page 11
