background image

4

1. Ungo-Net Interface Introduction

This product is equipped with Ungo’s newest and most revolutionary technology
to date, the Ungo-Net bus system.  Ungo-Net is a network system that allows
expansion, flexibility, and superior vehicle security through digital
communication.  This is established through a PC link through either a computer
or PDA, similar to a USB port on a PC.  Utilizing this interface, the alarm system
and remote transmitters can be configured to best suit the needs of the
operator.  This includes arming mode selections, auxiliary functions, multiple
vehicle operation, transmitter configuration, and interface modules.  

For additional convenience and operation, households with multiple vehicles
can utilize a single remote transmitter to operate 2 vehicles.  Eliminating the
cumbersome cluster of multiple remote transmitters.  Also, the remote
transmitters can be customized to better suit the needs of the operator.  The
Arm and Disarm buttons can be consolidated into the one button with the
remaining buttons controlling assignable features.

Capitalizing on Ungo-Net, an optional LCD FM transmitter kit can be added to
the security system (part #. FMKIT).  This transmitter features 2-way
communication via FM frequency for increased transmitting range and
operation.  With audible and visual confirmations, the operator can be aware of
the vehicles status and notified about violation attempts.     

In addition, system configuration, software upgrades, and diagnostics can be
performed through the Ungo-Net port.  Thus allowing the Ungo dealer to
maintain the utmost protection and serviceability of the security system.  Ungo-
Net also allows the dealer to trouble shoot false triggers and set sensor

calibration eliminating countless hours of guesswork.

Ungo-Net Accessories

PCLINK

: Includes Ungo-Net software, serial cable, instructions, and power

supply.

FMKIT

: Includes SAA217T (FM transmitter), extended range antenna,

instructions, and FM receiver module.

AUX BOX

: Includes receiver module, wiring harness, and instructions.

MS2106 owner 7-14.qxd  7/14/2003  1:42 PM  Page 4

Summary of Contents for UNGO MS2106

















Reviews: