SIRCR
5
•
To prevent a short-circuit, turn off the ignition
and remove the negative (-) battery cable
before starting to install. Connect the power
wires last.
•
Do not install the receiver where it will receive
direct sunlight or be subject to extreme
temperatures.
•
Mount the receiver firmly in place using the
hardware supplied. Incorrect installation may
cause damage to the system.
2. Installation cautions
•
Do not damage the vehicle wiring.
•
Use the supplied screws and washers.
•
Do not snag any wires when tightening the
screws.
In addition to the components in the kit, you will
need a dry, clean, lint-free cloth. If it’s cold outside
you may also need a hair dryer to warm the
adhesive backing on the mounting base.
Sirius_Shuttle_Vehicle_Installation.book Page 5 Friday, March 12, 2004 4:56 PM
