background image

SIRCR

15

For USA and Canada only
This product is warranted against all defects in material workman-
ship for a period of one year from the date of original purchase. 
Clarion ProAudio products, except for speakers, are covered by a 
two year limited warranty when installed by an authorized Clarion 
dealer. The conditions of this limited warranty and the extent of 
responsibility of Clarion Corporation of America (“Clarion”) under 
this limited warranty are as follows:
1. PROOF OF DATE OF PURCHASE WILL BE REQUIRED FOR 

WARRANTY SERVICE OF THIS PRODUCT. IN THE CASE OF 
THE TWO (2) YEAR LIMITED WARRANTY FOR CLARION 
PROAUDIO PRODUCT, PROOF OF INSTALLATION BY AN 
AUTHORIZED DEALER IS REQUIRED. INFORMATION 
ABOUT CLARION AUTHORIZED WARRANTY SERVICE 
CENTERS MAY BE OBTAINED BY CONTACTING CLARION 
AT THE ADDRESS BELOW.

2. This limited warranty will become void if service performed by 

anyone other than an approved Clarion Warranty Service Cen-
ter results in damage to the product.

3. This limited warranty does not apply to any product which has 

been subject to misuse, neglect or accident, or which has had 
the serial number altered, defaced or removed, or which has 
been connected, installed, adjusted or repaired, other than in 
accordance with the instructions furnished by Clarion.

4. This limited warranty does not cover car static or other electrical 

interferences, tape head or laser pick-up cleaning or adjust-
ments, or labor costs for the removal or reinstallation of the unit 
for repair.

5. The sole responsibility of Clarion under this limited warranty 

shall be limited to the repair of the product or replacement of the 
product, at the sole discretion of Clarion.

1. Limited warranty information

6. Product must be shipped in its original carton or equivalent car-

ton, fully insured, with shipping charges prepaid. Clarion will not 
assume any responsibility for any loss or damage incurred in 
shipping.

7. ALL IMPLIED WARRANTIES EXCEPT TO THE EXTENT PRO-

HIBITED BY APPLICABLE LAW SHALL HAVE NO GREATER 
DURATION THAN THE WARRANTY PERIOD SET FORTH 
ABOVE. UNDER NO CIRCUMSTANCES SHALL CLARION BE 
LIABLE FOR ANY LOSS OR DAMAGE, DIRECT OR CONSE-
QUENTIAL, ARISING OUT OF THE USE OR INABILITY TO 
USE THE PRODUCT. BECAUSE SOME STATES DO NOT 
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WAR-
RANTY LASTS OR EXCLUSIONS OR LIMITATIONS OF INCI-
DENTAL OR CONSEQUENTIAL DAMAGES, THE ABOVE 
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.

8. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL 

RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS 
WHICH VARY FROM STATE TO STATE.

9. Should you have any difficulties with the performance of this 

product during the warranty period, please call or visit our web 
site (www.clarion.com) for a listing of Authorized Warranty Ser-
vice Centers in your area. You may also contact Clarion at the 
address listed below.

In USA:
Clarion Corporation of America
Attn: Customer Service Manager
661 W. Redondo Beach Blvd.
Gardena, CA. 90247-4201
1-800-GO-CLARION
(310)327-9100

In Canada:
Clarion Canada, Inc.
Warranty Service Center
2239 Winston Park Drive
Oakville, Ontario L6H 5R1
(905)829-4600

Sirius_Shuttle_Vehicle_Installation.book  Page 15  Friday, March 12, 2004  4:56 PM

Summary of Contents for SIRCR





















Reviews: