54
NZ503
English
Owner’
s Manual
23. TROUBLESHOOTING
GENERAL
DVD PLAYER
Problem
Cause
Measure
0OWERDOESNOTTURNON
.OSOUNDISPRODUCED
Fuse is blown.
Replace with a fuse of the same
amperage. If the fuse blows again,
consult your store of purchase.
Incorrect wiring.
Consult your installation center.
Nothing happens when buttons
are pressed.
Display is not accurate.
The microprocessor has
malfunctioned due to noise, etc.
0RESSTHERESETBUTTONWITHATHINROD
Note:
When the Reset button is pressed, turn
off the power.
* When the Reset button is pressed,
FREQUENCIESOFRADIOSTATIONSTITLESETC
stored in memory are cleared.
The remote control unit does
not work.
Direct rays of the sun fall on the
LIGHTRECEPTIVEPARTOFTHEREMOTE
control unit.
When direct rays of the sun fall on
THELIGHTRECEPTIVEPARTOFTHEREMOTE
control unit, it may not work.
The battery of the remote control
unit is dead or there is no battery in
the remote control unit.
Check the battery of the remote control
unit.
Problem
Cause
Measure
Disc cannot be loaded.
!DISCISALREADYLOADED
%JECTTHEDISCBEFORELOADINGTHENEW
one.
There is foreign matter already in
the disc slot.
Remove the foreign matter, or consult a
service station.
3OUNDSKIPSORISNOISY
Disc is dirty.
Clean the disc with a soft cloth.
Disc is heavily scratched or
warped.
Replace with a disc in good condition.
3OUNDISBADDIRECTLYAFTER
power is turned on.
Condensation may form on the
internal lens when the car is parked
in a humid place.
Let dry for about 1 hour with the power
on.
Video images are not
displayed.
The parking brake is not engaged.
Check that the parking brake is
engaged.
Disc cannot play with
THEDISPLAYh0!2%.4!,
6)/,!4)/.vSHOWN
Feature exceeds set parental level.
Release the view limitation or change
the parental level.
3EETHESUBSECTIONh3ETTINGUPTHE
PARENTALLEVELv
