Clarion NX405E Page 34 Owner'S Manual Download

Page: 34 / 153

NX405E

English

Owner’

s Manual

English

Owner’

s Manual

Note:

The operation in iPod video mode is as same as iPod

Audio mode. Please refer to the iPod Audio Mode

operation.

Note:

Video playback is not available on all iPod/ iPhone

devices. Please contact your Clarion dealer for details.

An optional connection cable or accessory may be

required for this feature.

Note:

•

Video is not displayed when the automobile is

moving.

•

Image data may not be played back according to the

status of the iPod/iPhone.

•

The volume setting of video data is relatively lower

than audio data. Be sure to lower the volume setting

before switching to the other mode.

•

Do not select the categories with no track registered

from the iPod menu screen. The iPod/iPhone may be

frozen. If the iPod/iPhone is frozen, reset the iPod/

iPhone by following the procedure described in the

instruction manual of the iPod/iPhone.

•

Audio may be played back slightly out of

synchronization with video images.

Summary of Contents for NX405E

























































































































































Search results

Summary of Contents for NX405E

Reviews:

Related manuals for NX405E

Brands by name

Popular brands

Clarion NX405E, Owner'S Manual

Search results

Summary of Contents for NX405E

Reviews:

Related manuals for NX405E

Brands by name

Popular brands