Clarion NX405, Quick Start Manual & Installation Manual

Page: 30 / 202

29 NX405
English
English
Quick star
t guide
Installation Notes
• Use only the supplied parts.
¾ÍÆËȽ»ÁŲ½¼È¹ÊÌ˹ʽÍ˽¼ƓÌÀ½ÑŹѻ¹Í˽¼¹Å¹¿½Ɩ
• Any holes made in the body of the vehicle should be sealed with a
silicon adhesive. If exhaust fumes or water penetrates into the vehicle,
this may cause an accident.
• Fasten the bolts securely when installing the unit. If the bolts are loose
an accident or malfunction could occur.
• Please note the position of pipes, tanks and electrical wirings before
installing the unit into the vehicle; failure in avoiding these may cause a
ŲʽÇÊŹľÍÆ»ÌÁÇÆƖ
WARNING
• Loom all cables according to the instruction manual, so as not to hinder
operation.
• Wire the connecting cords/cables away from high temperature areas.
¾ÌÀ½»Ç¹ÌÁÆ¿ËǾÌÀ½»¹ºÄ½ËŽÄÌƓÁÌ»ÇÍļ»¹Í˽¹Æ¹»»Á¼½ÆÌƯŲʽºÑ¹
short circuit. Take care when wiring in the engine compartment.
• When wiring the connecting cables in a vehicle with an airbag system,
ƽνʾ½½¼ÌÀ½»¹ºÄ½ËÌÀÊÇÍ¿À¹ÈĹ»½ÏÀ½Ê½ÁÌÅ¹Ñ¹Ű½»ÌÌÀ½ÇȽʹÌÁÇÆ
of the airbag. An airbag not operating correctly in an emergency may
cause increased injury.
WARNING
CAUTION
Connection Notes
• Verify wires with a digital multi-meter prior to making any connections.
Many new vehicles use multiplexed and/or low voltage circuits that can
be damaged if a test light or logic probe is used.
• Connect cables appropriately. If a wrong connection is made, this may
»¹Í˽¹ŲʽÇʹ»»Á¼½ÆÌƖ
• When passing cables through the body of the vehicle, use non-
conductive grommets. If the coatings of the cables are worn out by
ÊͺºÁÆ¿ƓÌÀÁËŹѻ¹Í˽¹Æ¹»»Á¼½ÆÌƓŲʽÇʹËÀÇÊÌ»ÁÊ»ÍÁÌƖ
ƹ¾Ì½ÊÏÁÊÁÆ¿»¹ºÄ½ËƓŲÐÌÀ½ÅÏÁÌÀÁÆËÍĹÌÁÇÆ̹ȽƖ
ƹ½ËÍʽÌÇËÏÁÌ»ÀÇŰÌÀ½Î½ÀÁ»Ä½ÏÀ½Æ»ÇÆƽ»ÌÁÆ¿ÇʼÁË»ÇÆƽ»ÌÁÆ¿
cords to/from the unit, otherwise an electric shock, injury or accident
may occur.
CAUTION