Clarion FZ409, Owner'S Manual

Page: 29 / 34

29
English
FZ409
3 - 5 .
During finish adjustment, touch [ ENT
] key for
2 seconds to confirm.
3 - 6 .
If successfully delete the registered code,
“ DELETED ” will be displayed for 2 seconds
and back to 1
st
item.
When code is registered
3 - 3 .
Slide along [ ] slider or touch [ ]/[ ]
key to input the registered code.
3 - 4 .
Touch [ ] / [ ] key to set the previous or
next digit.
Note:
White down your personal code in case you forget
it.
3 - 6 .
“ MEMORY XXXX ” will be displayed for 2 sec-
onds where “ XXXX ” is the entered digits.
Common Operations
3 - 7 .
If unsuccessfully delete the registered code,
“ FAILED ” will be displayed for 2 seconds and
back to the “ INPUT 0000 ” display.
Turning the screen saver function on
or off
This unit is provided with the screen saver func-
tion which allows you to show various kinds of
patterns in the operation status indication area
of the display in a random order. You can turn
on or off this function. If the button operation is
performed with the screen saver function on, the
operation display corresponding to the button op-
eration is shown for about 30 seconds and the
display returns to the screen saver display.
∗
The factory default setting is “ ON ”.
3 - 1 .
Select “ SCREEN SAVER ”.
3 - 2 .
Touch [ ] key to enter detail setting stage.
3 - 3 .
Slide along [ ] slider or touch [ ]/[ ]
key to select “ ON ” or “ OFF ”.
Setting the method for title scroll
Set how to scroll in MP3/WMA/AAC title.
∗
The factory default setting is “ ON ”.
3 - 1 .
Select “ AUTO SCROLL ”.
3 - 2 .
Touch [ ] key to enter detail setting stage.
3 - 3 .
Slide along [ ] slider or touch [ ]/[ ]
key to select “ ON ” or “ OFF ”.
Setting the scroll speed
This function allows you to adjust the speed of
the title scroll.
∗
The factory default setting is “ 3 ”.
3 - 1 .
Select “ SCROLL SPEED ”.
3 - 2 .
Touch [ ] key to enter detail setting stage.
3 - 3 .
Slide along [ ] slider or touch [ ]/[ ]
key to adjust the speed value. (Parameter
range: 1~5)
OFF
To scroll just 1 time.
ON
To scroll automatically.
Setting the dimmer control
You can set the dimmer control “ ON ” or “ OFF ”.
∗
The factory default setting is “ ON ”.
3 - 1 .
Select “ DIMMER ”.
3 - 2 .
Touch [ ] key to enter detail setting stage.
3 - 3 .
Touch the [ ] / [ ] key to select “ ON ” or
“ OFF ”.