FZ105BT
8
English
Note
:
Playing order will depend on Bluetooth audio
player. When
[ ]
button is pressed, some
A2DP devices will restart the current track
depends on the duration of playback.
During music streaming playback “
A2DP
” will
be shown on the display. When A2DP and
HFP device is disconne ct ,
“ BLUETOOTH
DISCONNECT”
will be shown on the display
and return to previously selected audio source.
Some Bluetooth audio players may not have
play / pause synchronized with this unit. Please
make sure both device and main unit are in the
same play / pause status in
BT MUSIC
mode.
1. Press the
[ ]
button to advance to the
next track/song.
Press the
[ ]
button to go to previous
track/song.
2. Press and hold the
[ ]
button to fast
forward through the track/song.
Press and hold the
[ ]
button to fast
backward through the track/song.
Selecting a Track
Play
/
Pause
Press the
[ ]
button to pause the track/song
that is currently playing.
Press the
[ ]
button to resume playing the
track/song that has been paused.
ID3 Display
During music streaming playback, press
[INFO]
to
view the ID3 display information:
TITULO -> ARTIST -> ALBUM -> CLOCK
6. TROUBLESHOOTING
Unit cannot
power on.
No/low audio
output.
Poor sound
quality or
distortion.
Unit resets itself
when engine is off.
Incorrect connection between
ACC and Battery.
Speaker power rating does
not match unit.
Wrong connections.
Speaker is shorted.
Check the wiring and correct.
Replace speakers.
Check wiring and correct.
Check wiring and correct.
GENERAL
Unit
fuse
blown.
Improper audio output connection.
Volume set too low.
Speakers damaged.
Heavily biased volume balance.
Speaker wiring is in contact
with metal part of car.
Car battery fuse blown.
Replace with new fuse of correct rating.
Check wiring and correct.
Increase volume level.
Replace with new fuse of correct rating.
Replace speakers.
Adjust the channel balance to center position.
Insulate all speaker wiring connections.
Problem
Cause
Measure
Problem
Cause
Measure
USB device cannot
be inserted.
USB device is not
recognized.
No sound heard with
the display “No File”
shown.
Sound skips or is
noisy.
The USB device is damaged.
No MP3/WMA file is stored in
the USB device.
MP3/WMA files are not
encoded properly.
The USB device has been
inserted with wrong direction.
The USB connector is broken.
Reversing the connection direction of the USB
device, try it again.
Replace with a new USB device.
USB
Disconnect the USB device and reconnect. If
the device is still not recognized, try replacing
with a different USB device.
Store these files properly in the USB device.
Use MP3/WMA files encoded properly.
Connectors are loose.
Problem
Cause
Measure
Cannot pair the
Bluetooth enabled
device with the
audio system.
The audio quality is
poor after connection
with a Bluetooth-
enabled device.
The Bluetooth reception is poor.
The device does not support the
profiles required for the system.
The Bluetooth function of the
device is not enabled.
Use another device to connect.
Refer to the user manual of the device for how
to enable the function.
Bluetooth
Move the device closer to the audio system or
remove any obstacle between the device and
the system.
Summary of Contents for FZ105BT
Page 10: ......
