6
English
FZ102E
5.
RADIO MODE OPERATIONS
Listening to the radio
Radio Mode
Push the [
] rotary knob and select the
radio mode.
Select the band
Press the [
BAND
] button to select the desired
band.
FM1 FM2 FM3 AM FM1...
Tuning a station
Select the tuning method
Press longer the [
BAND
] button to toggle be-
tween Auto and Manual tuning method.
*
is lit in the display for Manual Tuning mode.
Auto tuning the stations
Press longer the [
BAND
] button to toggle be-
tween Auto and Manual tuning method.
DX SEEK
(Automatically tune in to a receivable broadcast
station)
Press the [
] / [
] button.
LOCAL SEEK
(
Tune in to broadcast station with strong reception
sensitivity)
Press longer the [
] / [
] button.
Manual tuning the stations
Step tuning
(Change the frequency one step at a time)
Press the [
] / [
] button.
Quick tuning
(Change the frequency rapidly)
Press longer the [
] / [
] button.
Storing radio stations
Storing manually
1. Select a radio band and tune in a desired radio
station.
2. Press longer the [
DIRECT
] button to store the
station into preset memory.
Note:
Preset memory function can store up to 24 sta-
tions: Six stations for each of FM1, FM2, FM3 and
AM.
Recall a stored station
1. Select the desired band.
2. Press the corresponding [
DIRECT
] button to
recall the stored station.
About RDS (Radio Data System)
This unit has a built-in RDS decoder system that
supports broadcast stations transmitting RDS
data.
This system can display the name of the broad-
cast station being received (PS) and can auto-
matically switch to the broadcast station with the
best reception as you move long distances (AF
switching).
Also, if a traffic announcement or programme
type is broadcast from an RDS station, no matter
what mode you are in, this broadcast is received.
Additionally, if EON information is received, this
information enables automatic switching of other
preset stations on the same network and interrup-
tion of the station being received with traffic infor
-
mation from other stations (TP). This function is
not available in some areas.
When using the RDS function, always set the ra
-
dio to FM mode.
AF : Alternative Frequency
PS : Programme Service Name
PTY : Programme Type
EON : Enhanced Other Network
TP : Traffic Programme
RDS interrupt does not function during AM radio
reception.
When set receives RDS signal, and can read PS
data, PS appears in the display.
CAUTION
For some countries, RDS (Radio Data
System) broadcasting is not supported.
It is recommended to turn off all the RDS
settings.
Radio Mode Operations
FZ102E_Owner_manual.indb 6
7/24/2012 9:55:18 AM
