Clarion fz102e, Ower'S Manual

Page: 12 / 17

12
English
FZ102E
7. AUXILIARY INPUT
8. ADJUSTMENT MODE
AUX mode
1. Connect the external music player to the
AUX input.
2. Push the [ ] rotary knob select AUX
mode.
This system has an external jack input in the front
panel where you can listen to sounds and music
from external devices connected to this unit.
Notes:
Use only the 3.5mm stereo jack for the AUX jack
input.
Volume can be adjusted through the unit.
Remove the audio jack from AUX input during AUX
mode will not revert to Radio mode automatically.
Note:
For some countries, RDS (Radio Data System) broad-
casting is not supported. It is recommended to turn off
all the RDS settings.
1. Press longer the [ DISP ] button to enter adjust-
ment selection display.
2. Press the [ ] / [ ] button to select the Item
name.
(“AF” “REG” “PTY” “PTY-SEL”)
“CLOCK” “12/24 HR” “CLK ADJ”
“SCROLL” “RESET” “AF”…
Notes:
Items in bracket (PTY, PTY SEL, AF and REG)
are known as RDS Mode adjustment. It will only
be available for selection during Radio mode FM
band.
“ PTY-SEL ” is available only when “ PTY ON ”.
“ REG ” is available only when “ AF ON ”.
Setting Regional (REG)
1. Select “ REG ”.
2. Turn the [ ] rotary knob to select “ ON ”
or “ OFF ”.
Notes:
When the REG function is ON, the optimum re -
gional station can be received. When this function
is OFF, if the regional station area switches as you
drive, a regional station for that region is received.
The factory default setting is “ OFF ”.
This function is disabled when a national station
such as BBC R2 is being received.
The REG function ON/OFF setting is valid when
the AF function is ON.
Setting alternate frequency (AF)
1. Select “ AF ”.
2. Turn the [ ] rotary knob to select “ ON ”
or “ OFF ”.
Notes:
The AF function switches to a different frequency
on the same network in order to maintain optimum
reception.
The factory default setting is “ OFF ”.
If the reception of the current broadcast station de-
teriorates, “ SEARCH ” appears in the display and
the radio searches for the same programme on
another frequency.
Cancelling a PTY interrupt broadcast
Press the [ TA ] button during the PTY interrupt
broadcast.
Setting Programme Type (PTY)
1. Select “ PTY ”.
2. Turn the [ ] rotary knob to select “ ON ”
or “ OFF ”.
Notes:
This function enables you to listen to a broadcast
of the selected programme type even if the unit is
on a function mode other than radio.
Some countries do not yet have PTY broadcast.
In the TA standby mode, a TP station has priority
over a PTY broadcast station.
The factory default setting is “ OFF ”.
PTY SEEK
During PTY item display, press the [ ] / [ ]
button to search for a PTY broadcast.
Note:
If no station with the selected PTY broadcast can
be received, the unit returns to the previous receiv-
ing station.
FZ102E_Owner_manual.indb 12 7/24/2012 9:55:21 AM