Clarion DXZ956MC, Owner'S Manual

Page: 41 / 56

English
280-8213-00
DXZ956MC
41
Setting the clock (CLOCK)
When the power is OFF, the clock is displayed.
The clock is displayed in 12-hour format.
1. Press the [ ADJ ] button.
2. Touch [ APPEARANCE ].
3. Touch on the left slide button to select
“ CLOCK EDIT ” and touch [ ENT ].
CLOCK EDIT
ADJ APPEARANCE
RTN
[ENT]
The time (e.g. “ 2pm:45 ”) currently set on this
unit is displayed, and the mode changes to
the time setting mode.
4. Touch on the left slide button to set
hours.
2pm : 45
ADJ APPEARANCE CLOCK
RTN SET
∗
If you operate another button while you
are setting the time, the time is not
adjusted.
5. Touch on the right slide button to set
minutes.
6. Touch [ SET ].
∗
You will hear a long beep, and the time is
set.
Notes:
• The clock cannot be adjusted when the power is
OFF.
• When the battery has been removed for
maintenance or for repair, set the time again.
7. Press the [ ADJ ] button to return to the
original mode.
Displaying messages (MSG
INFO)
This function allows you to display a message
on the display when no operation is performed
for more than 30 seconds.
• The factory default setting is “ OFF ”.
1. Press the [ ADJ ] button to set to the adjust
mode.
2. Touch [ APPEARANCE ].
3. Touch on the left of the display to
select " MSG INFO ".
ADJ APPEARANCE
RTN
MSG I N F O O F F
4. Touch on the right of the display to
select “ ON ” or “ OFF ”.
5. Press the [ ADJ ] button to return to the
original mode.
Entering messages to display
in message information (MSG
INPUT)
• Up to 30 characters can be entered.
• The factory default setting is “
Welcome to
Optimedia ”.
1. Press the [ ADJ ] button to set to the adjust
mode.
2. Touch [ APPEARANCE ].
3. Touch on the left of the display to
select " MSG INPUT ".
ADJ-APPEARANCE
RTN
MSG INPUT [ENT]
4. Touch [ ENT ].
The mode changes to the message entry
mode.
5. Touch [ ]/[ ] to determine the entry
position.
MESSAGE INPUT
MEMO
FONT
A A-Z
RTN
TEXT
We I come to
6. Touch on [ FONT ] to select the type of
text.
Each touch of
switches the type of
text. For details, see page 38.
7. Touch on [ TEXT ] to determine the
character to enter.
8. Repeat steps 5 to 7 to enter the message.
9. Touch [ MEMO ].
You will hear a long beep, and the message
is stored in memory.
10. Press the [ ADJ ] button to return to the
original mode.
Common Operations
+DXZ956MC_01-27-Eng.p65 1/27/05, 6:05 PM 41