Clarion DXZ956MC, Owner'S Manual

Page: 31 / 56

English
280-8213-00
DXZ956MC
31
Sound Adjustment
SETTING–ALL SEAT
The setting of “ TIME ALIGN ” and “ SP GAIN ”
temporarily returns to the factory default setting.
When the setting that is adjusted for the driver's
seat returns to the factory default setting, a
sound suitable for all seats is provided.
1. Press the [ SOUND ] button.
2. Touch [ SETTING ].
3. Touch [ ALL SEAT ].
SETTING
P.EQ X-OVER
TIME
ALIGN
SP
GAIN
ALL
SEAT
PRESET RTN
ON ALL
“ ALL ” appears on the display and the setting
of “ TIME ALIGN ” and “ SP GAIN ” is set to the
factory default setting.
■
To disable ALL SEAT setting
1. Touch [ ALL SEAT ] again.
Storing and recalling the
SETTING adjustments
If your speaker system is “ 3 WAY ” or “ 2 WAY ”,
you can store and recall up to three adjustments
you have made to “
P.EQ ”, “ X-OVER ”, “ TIME
ALIGN ”, “ SP GAIN ”.
1. Adjust one of the items in the SETTING.
2. Display the [ SETTING ] screen.
∗
To display this screen from the beginning,
press the [
SOUND ] button, then touch
[ SETTING ].
3. Touch [ PRESET ].
SETTING
P.EQ X-OVER
TIME
ALIGN
SP
GAIN
ALL
SEAT
PRESET
RTN
OFF
4. Touch one of [ SAVE 1 ], [ SAVE 2 ], and
[ SAVE 3 ].
SETTING PRESET
LOAD
1
LOAD
2
LOAD
3
SAVE
1
SAVE
2
SAVE
3
INITIAL RTN
∗
If you touch [ LOAD ] or [ INITIAL ] before
touching [ SAVE ], the adjustments you
have made will not be stored.
■
To initialize the adjustments
You can initialize the adjustments for SETTING
items.
1. Touch [ SETTING ].
2. Touch [ INITIAL ].
All the adjustments are initialized.
■
To recall the adjustments for
SETTING items
You can recall the stored adjustments for
SETTING items.
1. Press the [ SOUND ] button.
2. Touch [ SETTING ].
3. Touch [ PRESET ].
SETTING
P.EQ X-OVER
TIME
ALIGN
SP
GAIN
ALL
SEAT
PRESET RTN
OFF
4. Touch one of [ LOAD 1 ], [ LOAD 2 ], and
[ LOAD 3 ] to recall the stored adjustment.
Adjusting the sub-woofer/
center speaker
• “ SW VOLUME ” (sub-woofer) can be adjusted
only when the “ SPEAKER SELECT ” is set to
“ 3WAY ”, “ Dolby PL II ” or “ NORMAL ” and
“ SUB-WOOFER “ is set to “ ON ” (cf. page 43).
• “ CTR VOLUME ” (center speaker) can be
adjusted only when the “ SPEAKER SELECT ”
is set to “ Dolby PL II ” and “ CENTER-SP ” is
set to “ ON ” (cf. page 43).
• The factory default setting for SW VOLUME is
“ 0 ” and for CTR VOLUME is “ 0 ”.
1. Press the [ SOUND ] button.
2. Touch [ SW VOLUME ] or [ CTR VOLUME ].
SW VOLUME
RTN
0
∗
If you selected “ Dolby PL II ”, use [
Å
]/[
Î
]
to go to the next page.
3. Touch on the right of the display and
adjust the item as desired.
∗
This item can be adjusted within the range
-5 to +5.
4. Press the [ SOUND ] button to return to the
original mode.
+DXZ956MC_01-27-Eng.p65 1/27/05, 6:05 PM 31