Clarion DXZ848RMC, Owner'S Manual

Page: 14 / 40

14
DXZ848RMC
English
Radio Operations
Listening to the radio
1. Press the [ FNC ] button and select the radio
mode. The frequency or PS appears in the
display.
∗
PS: Programme service name
2. Press the [ BND ] button and select the radio
band. Each time the button is pressed, the ra-
dio reception band changes in the following
order:
FM1
➜
FM2
➜
FM3
➜
AM (MW/LW)
➜
FM1...
3. Press the [
a
] or [
d
] button to tune in the
desired station.
Tuning
There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to receiv-
able broadcast stations; LOCAL SEEK can tune
in to only broadcast stations with a good recep-
tion sensitivity.
1. Press the [ BND ] button and select the de-
sired band (FM or AM (MW, LW)).
2. Tune into a station.
∗ If “ MANU ” is lit in the display, press and hold
the [ BND ] button for 1 second or longer.
“ MANU ” in the display goes off and seek tun-
ing is now available.
∗ If “ TA ” is lit in the display, TP stations are auto-
matically sought.
●
DX SEEK
Press the [
a
] or [
d
] button to automatically
seek a station.
When the [
d
] button is pressed, the station is
sought in the direction of higher frequencies; if
the [
a
] button is pressed, the station is sought
in the direction of lower frequencies.
∗
When seek tuning starts, “ DX SEEK ” appears in
the display.
●
LOCAL SEEK
If you press and hold the [
a
] or [
d
] button for
1 second or longer, local seek tuning is carried
out. Broadcast stations with good reception sen-
sitivity are selected.
∗ When local seeking starts, “ LO SEEK ” appears in
the display.
Basic Operations
2. Turning the [ ROTARY ] knob clockwise em-
phasizes the treble; turning it counterclock-
wise attenuates the treble.
∗
The factory default setting is “ TREB
Å Å Å Å Å
G 0
Î Î Î Î Î
”.
(Adjustment range: –6 to +6)
3. Press the [
a
] or [
d
] button to select
“ TREB
Å Å Å Å Å
F 12k
Î Î Î Î Î
”.
Turning the [ ROTARY ] knob clockwise or
counterclockwise to select the frequency.
∗ The factory default setting is “ TREB
Å Å Å Å Å
F 12k
Î Î Î Î Î
”.
(Adjustment 8 kHz/12 kHz)
4. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.
Adjusting the balance
1. Press the [ A-M ] button and select “ BAL-
ANCE 0 ”.
2. Turning the [ ROTARY ] knob clockwise em-
phasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
∗ The factory default setting is “ BALANCE 0 ”.
(Adjustment range: L13 to R13)
3. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.
Adjusting the fader
1. Press the [ A-M ] button and select “ FADER 0 ”.
2. Turning the [ ROTARY ] knob clockwise em-
phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.
∗ The factory default setting is “ FADER 0 ”. (Ad-
justment range: F12 to R12)
3. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.