Clarion DXZ848RMC, Owner'S Manual

Page: 13 / 40

DXZ848RMC
13
English
2. Press and hold the [ A-M ] button for 1 second
or longer to turn off the MAGNA BASS
EXTEND effect. “
M-B EX ” goes off from the
display.
Note:
• When “ ADF-1 ”, “ ADF-2 ” or “ ADF-3 ” is selected for
ADF (Anti Distortion Filter), setting of MAGNA
BASS EX cannot be performed.
Setting the Anti Distortion Filter
The adopted “ Liveliness Enhancement Filter ”
and “ Sound Tone Compensation ” functions al-
low well-modulated realistic playback without af-
fecting the characteristics of the original sound
tone.
This unit are provided with 3 types of sound
tone effects stored in memory. Select the one
you prefer.
∗
The factory default setting is “ ADF OFF ”.
Each time you press the [ ADF ] button, the tone
effect changes in the following order:
“ADF-1”
➜
“ADF-2”
➜
“ADF-3”
➜
“ADF OFF” ...
• ADF-1 : suitable for the genuine speakers
• ADF-2 : suitable for separate speakers
• ADF-3 : suitable for coaxial speakers
• ADF OFF : no sound effect
Notes:
• The volume changes each time the ADF (Anti Dis-
tortion Filter) setting is switched. Turn down the
volume and the sub-woofer volume before per-
forming a switching operation.
• Sufficient effects cannot be obtained with some
speaker systems. In such cases, adjust the vol-
ume.
Adjusting the tone
Press the [ A-M ] button and select the item to
adjust. Each time you press the [ A-M ] button,
the item changes as following order:
●
When “ADF 1, 2, 3” is set
“SW-VOL 0”
➜
“BALANCE 0”
➜
“FADER 0”
➜
Last function mode.
●
When “ADF OFF” is set
“SW-VOL 0”
➜
“BASS
Å Å Å Å Å
GAIN
Î Î Î Î Î
”
➜
“TREB
Å Å Å Å Å
GAIN
Î Î Î Î Î
”
➜
“BALANCE 0”
➜
“FADER 0”
➜
Last function mode.
Note:
• As subwoofer is effective, “ SW-VOL 0 ” can be
selected.
Adjusting the Subwoofer
∗
The factory default setting is “ SW-VOL 0 ”
∗
This function can be adjusted only when the
subwoofer output is set to “
ON ”. For details on “ Se-
lecting the Subwoofer ”, refer to the section “ Op-
erations Common to Each Mode ” of each owner’s
manual.
1. Press the [ A-M ] button, “ SW-VOL 0 ” appears
in the display.
2. Turning the [ ROTARY ] knob to select from –6
to +6.
3. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can be performed when the
ADF (Anti Distortion Filter) is set to “
ADF OFF ”.
1. Press the [ A-M ] button and select
“ BASS
Å Å Å Å Å
GAIN
Î Î Î Î Î
”.
2. Turning the [ ROTARY ] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
∗ The factory default setting is “ BASS
Å Å Å Å Å
G 0
Î Î Î Î Î
”.
(Adjustment range: –6 to +8)
3. Press the [
a
] or [
d
] button to select
“ BASS
Å Å Å Å Å
F 50
Î Î Î Î Î
”.
Turninng the [ ROTARY ] knob clockwise or
counterclockwise to select the frequency.
∗
The factory default setting is “ BASS
Å Å Å Å Å
F
50
Î Î Î Î Î
”.(Adjustment 50/80/120 Hz)
4. Press the [
a
] or [
d
] button to select
“ BASS
Å Å Å Å Å
Q 1
Î Î Î Î Î
”.
Turning the [ ROTARY ] knob clockwise or
counterclockwise to select the Q-curve.
∗ The factory default setting is “ BASS
Å Å Å Å Å
Q 1
Î Î Î Î Î
”.
(Adjustment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.
Adjusting the treble (Gain,
Frequency)
This adjustment can be performed when the
ADF (Anti Distortion Filter) is set to “
ADF OFF ”.
1. Press the [ A-M ] button and select
“ TREB
Å Å Å Å Å
GAIN
Î Î Î Î Î
”.
Basic Operations