22
DXZ766MP
280-8371-00
English
3-3. Press and hold the [
] button for 2
seconds or longer to store the message in
memory and return to the display adjust
mode.
∗
Press and hold the [
BND
] button for 1
second or longer to delete the message.
Then press and hold the [
] button for 2
seconds or longer to return the message to
the default setting.
●
Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA TITLE.
∗
The factory default setting is “
ON
”.
2-1. Select “
AUTO SCRL”
.
3-1. Turn the [
ROTARY
] knob to select “
ON
” or
“
OFF
”.
• ON:
Scrolls automatically.
• OFF:
Scrolls just 1 time when the title was
changed or you press and hold the [
T
]
button for 1 second or longer.
●
Setting the DIMMER control
You can set the dimmer control “
ON
” or “
OFF
”.
∗
The factory default setting is “
ON
”.
2-1. Select “
DIMMER
”.
3-1. Turn the [
ROTARY
] knob to select on “
ON
”
or “
OFF
”.
To change other settings
1. Press the [
ADJ
] button to switch to the
adjustment selection display.
2. Press the [
å
,
∂
] lever upward or
downward to select the “
item name
”.
Each time the [
å
,
∂
] lever is pressed
up/down, the item display changes in the
following order:
“ BLINK LED”
↔
“ SUB-W”
↔
“ SUB-W LPF”
↔
“ AMP CANCEL”
↔
“ AUX SENS”
↔
“ SYSTEM CHECK”
3. Turn the [
ROTARY
] knob to select the
“
desired setting item
”.
∗∗∗∗∗
After completing settings,
press the
[
ADJ
] button to return to the previous
mode.
●
Anti-theft indicator
The red Anti-theft indicator is a function for
preventing theft. When the DCP is removed
from the unit, this indicator blinks.
∗
The factory default setting is “
OFF
”.
2-1. Select “
BLINK LED
”.
3-1. Turn the [
ROTARY
] knob to select “
ON
” or
“
OFF
”.
●
Setting the subwoofer
You can set the subwoofer on or off.
∗
The factory default setting is “
ON
”.
2-1. Select “
SUB-W
”.
3-1. Turn the [
ROTARY
] knob to select “
ON
” or
“
OFF
”.
●
Setting LOW PASS FILTER
∗
The factory default setting is “
THROUGH
”.
∗
If subwoofer function is set “
ON
”, “
LOW PASS
FILTER
” can be selected.
2-1. Select “
SUB-W LPF
”.
3-1. Turn the [
ROTARY
] knob to select the setting.
Each time you turn the [
ROTARY
] knob, the
setting changes in the following order:
THROUGH
➜
50 Hz
➜
80 Hz
➜
120 Hz
●
Setting the external amplifier
∗
The factory default setting is “
OFF
”.
2-1. Select “
AMP CANCEL”
.
3-1. Turn the [
ROTARY
] knob to select “
ON
” or
“
OFF
”.
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
●
Adjusting the auxiliary input sensitivity
Adjust the auxiliary sensitivity when the audio
from an external device is difficult to hear even
after adjusting the volume.
∗
The factory default setting is “
MID
”.
2-1. Select “
AUX SENS
”.
3-1. Turn the [
ROTARY
] knob to select from
“
LOW
”, “
MID
” or “
HIGH
”.
Operations Common to Each Mode
