Clarion DXZ766MP, Owner'S Manual

Page: 15 / 31

280-8371-00
DXZ766MP
15
English
2. Press and hold the [ A-M ] button for 1 second
or longer to turn off the MAGNA BASS
EXTEND effect. “
MB ” goes off.
Setting the Z-Enhancer
This unit are provided with 3 types of sound
tone effects stored in memory. Select the one
you prefer.
∗
The factory default setting is “ OFF ”.
Each time you press the [ Z ] button, the tone
effect changes in the following order:
“OFF”
➜
“BASS BOOST”
➜
“IMPACT”
➜
“EXCITE”
➜
“OFF” ...
• BASS BOOST : bass emphasized
• IMPACT : bass and treble emphasized
• EXCITE : bass and treble emphasized
mid deemphasized
• OFF : no sound effect
Adjusting the tone
Press the [ A-M ] button and select the item to
adjust. Each time you press the [ A-M ] button,
the item changes as following order:
●
When “BASS BOOST” is set
“SW VOLUME”
➜
“BALANCE”
➜
“FADER”
➜
Last function mode...
●
When “IMPACT” is set
“SW VOLUME”
➜
“BALANCE”
➜
“FADER”
➜
Last function mode...
●
When “EXCITE” is set
“SW VOLUME”
➜
“BALANCE”
➜
“FADER”
➜
Last function mode.
●
When “OFF” is set
“SW VOLUME”
➜
“ BASS”
➜
“ TREB”
➜
“BALANCE”
➜
“FADER”
➜
Last function mode...
Notes:
• As subwoofer is effective, “ SW VOLUME ” can be
selected.
• The display automatically returns to the previous
mode.
Adjusting the subwoofer
∗
The factory default setting is “ 0 ”
∗
This function can be adjusted only when the
subwoofer output is set to “
ON ”. For details on
how to set the subwoofer, refer to the subsection
“
Setting the subwoofer ” in the section
“ Operations Common to Each Mode ”.
1. Press the [ A-M ] button to select “ SW
VOLUME ”.
Basic Operations
2. Turn the [ ROTARY ] knob to select from –6 to
+6.
3. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.
Adjusting the bass
This adjustment can only be performed when the
Z-Enhancer is set to “
OFF ”.
1. Press the [ A-M ] button and select “ BASS ”.
2. Turn the [ ROTARY ] knob to adjust the bass.
∗
The factory default setting is “ 0 ”. (Adjustment
range: –6 to +7)
3. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.
Adjusting the treble
This adjustment can only be performed when
the Z-Enhancer is set to “
OFF ”.
1. Press the [ A-M ] button and select “ TREB ”.
2. Turn the [ ROTARY ] knob to adjust the treble.
∗
The factory default setting is “ 0 ”. (Adjustment
range: –6 to +6)
3. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.
Adjusting the balance
1. Press the [ A-M ] button and select
“ BALANCE ”.
2. Turn the [ ROTARY ] knob to adjust the
balance of the left and right speakers.
∗
The factory default setting is “ 0 ”. (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.
Adjusting the fader
1. Press the [ A-M ] button and select “ FADER ”.
2. Turn the [ ROTARY ] knob to adjust the
balance of the front and rear speakers.
∗
The factory default setting is “ 0 ”. (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.