Basic Operations
English
13
DUZ385SAT
Sound Adjustment
You can adjust a sound effect or tone quality to
your preference.
●
Setting the Z-Enhancer Plus
This unit is provided with 4 types of sound tone
effects stored in memory.
Select the one you prefer.
∗
The factory default setting is “
OFF
”.
2-1. Select “
Z-EHCR
”.
3-1. Each time you press the [
w
] or [
z
] button,
the tone effect changes in the following
order:
“
Z+FLAT
”
↔
“
CUSTOM
”
↔
“
EXCITE
”
↔
“
IMPACT
”
↔
“
B-BOOST
”
↔
“
OFF
”
Z+FLAT
: user Z+FLAT
CUSTOM
: user custom
EXCITE
: bass and treble emphasized
mid emphasized
IMPACT
: bass and treble emphasized
B-BOOST
: bass emphasized
OFF
: no sound effect
When “Z+FLAT” is set:
3-2. Press and hold the [
] button for
1 second or longer, bass/treble
characteristics become flat and switch to
the “
CUSTOM
” mode.
When “CUSTOM” is set:
3-2. Press the [
] button to enter the “
BASS/
TREBLE
” adjust mode.
When “EXCITE/IMPACT/B-BOOST” is set:
3-2. Press the [
] button.
3-3. Press the [
w
] or [
z
] button to adjust the
setting in the range of –3 to +3.
∗
The factory default setting is “
0
”.
3-4. Press the [
] button to return to the
previous mode.
●
Adjusting the bass/treble
This adjustment can be performed only when
the Z-Enhancer Plus is set to “
CUSTOM
”.
3-2. Press the [
] button.
3-3. Press the [
x
] or [
v
] button to select as
following order.
BASS G
↔
BASS F
↔
BASS Q
↔
TREBLE G
↔
TREBLE F
The factory default setting is “
BASS G
”.
3-4. Press the [
]
button.
3-5. Press the [
w
] or [
z
] button to select the
setting.
BASS G
: The factory default setting is “
0
”.
(Adjustment range: +7 to –7)
BASS F
: The factory default setting is
“
60
”.
(Adjustment range: 60/80/100/
200)
BASS Q
: The factory default setting is “
1
”.
(Adjustment range: 1/1.25/1.5/2)
TREB G
: The factory default setting is “
0
”.
(Adjustment range: +7 to –7)
TREB F
: The factory default setting is
“
10K
”.
(Adjustment range: 10K/12.5K/
15K/17.5K)
3-6. Press the [
] button to return to the
previous mode.
To change sound setting
1. Press the [
] button to switch to the
sound adjustment selection display.
∗
The factory default sound setting is “
Z-
EHCR
”.
2. Then press the [
x
] or [
v
] button to
select the sound adjustment mode.
Each time you press the [
x
] or [
v
]
button, the sound adjustment mode
changes as following order:
“
Z-EHCR
”
↔
“
BALANCE
”
↔
“
FADER
”
∗
In the case of display blinking “
ENT
”, you
can press the [
] button to adjust the
setting value.
3. Press the [
w
] or [
z
] button to adjust the
selected audio mode.
4. After completing settings, press the [
]
button to return to the previous mode.
DUZ385SAT_EN.book Page 13 Friday, November 23, 2007 7:49 PM
