12
DFZ667MC
English
6. OPERATIONS
Notes:
Be sure to read this chapter referring to the front diagrams
of chapter “
3. CONTROLS
” on page 5 (unfold).
Basic Operations
CAUTION
Be sure to lower the volume before switching
off the unit power or the ignition key. The unit
remembers its last volume setting. If you
switch the power off with the volume up,
when you switch the power back on, the
sudden loud volume may hurt your hearing
and damage the unit.
Turning on/off the power
Notes:
•
Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [
SRC
] button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
3. Press and hold the [
SRC
] button for 1 second
or longer to turn off the power for the unit.
Notes:
•
When turning on for the first time after connected
correctly, this unit automatically starts system
check and “
SYSTEM CHK
” appears in the display.
When completed, the unit turns its power off
automatically. Then, press the [
SRC
] button.
Selecting a mode
1. Press the [
SRC
] button to change the
operation mode.
2. Each time you press the [
SRC
] button, the
operation mode changes in the following
order:
Radio mode
➜
CD/MP3/WMA mode
➜
M.CATCHER mode
➜
SD mode
➜
(iPod
mode)
➜
(CD changer mode)
➜
(DVD
changer mode)
➜
(TV mode)
➜
AUX mode
➜
Radio mode...
*
External equipment not connected with
CeNET is not displayed.
Adjusting the volume
1. Turn the [
ROTARY
] knob clockwise to
increase the volume; turning it
counterclockwise decreases the volume.
*
The volume level is from 0 (minimum) to 33
(maximum).
Switching the display
1. Press the [
D
] button to select the desired
display.
2. Each time you press the [
D
] button, the
display switches in the following order:
Main display
➜
Title display
➜
Clock display
➜
Main display...
*
Once selected, the preferred display becomes
the display default. When a function
adjustment such as volume is made, the
screen will momentarily switch to that
function’s display, then revert back to the
preferred display several seconds after the
adjustment.
*
When you have entered a title, it appears in the
title display. If you have not entered a title, “
NO
TITLE
” appears in the title display instead. For
details on how to enter a title, refer to the
subsection “
Entering titles
” (page 23) in the
section “
Common Operations
”.
Setting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust the
low sound area like the normal sound adjustment
function, but emphasizes the deep bass sound
area to provide you with a dynamic sound.
*
The factory default setting is off.
1. Press and hold the [
A-M
] button for 1 second
or longer to turn on the MAGNA BASS
EXTEND effect. “
M-B EX
” lights in the display.
2. Press and hold the [
A-M
] button for 1 second
or longer to turn off the MAGNA BASS
EXTEND effect. “
M-B EX
” goes off from the
display.
Notes:
•
When “
DZE-1
”, “
DZE-2
” or “
DZE-3
” is selected for
DZE (Digital Z-Enhancer), setting of MAGNA
BASS EXTEND cannot be performed.
DFZ667MC.book Page 12 Wednesday, June 14, 2006 4:39 PM
