4
DB566USB
Be sure to unfold and read the next page.
This unit has been designed specifically for play-
back of compact discs bearing the mark.
No other discs can be played.
To remove the compact disc from its storage
case, press down on the center of the case
and lift the disc out, holding it carefully by the
edges.
Note:
Do not use commercially available CD protection
sheets or discs equipped with stabilizers, etc.
These may get caught in the internal mechanism
and damage the disc.
Never stick labels on the surface of the compact
disc or mark the surface with a pencil or pen.
Always handle the compact disc by the edges.
Never touch the surface.
To remove fingermarks and dust, use a soft
cloth, and wipe in a straight line from the center
of the compact disc to the circumference.
New discs may have some roughness around
the edges. The unit may not work or the sound
may skip if such discs are used. Use a ball-point
pen, etc. to remove roughness from the edge
of the disc.
Do not use any solvents such as commercially
available cleaners, anti-static spray, or thinner
to clean compact discs.
Do not use compact discs that have large
scratches, are misshapen, or cracked, etc.
Use of such discs will cause misoperation or
damage.
Do not expose compact discs to direct sunlight
or any heat source.
Note on compact discs
3. HANDLING COMPACT DISCS
1. During extreme cold temperatures, condensa-
tion may form on the disc and/or the optical
part of the player. If the disc exhibits condensa-
tion, carefully wipe off the disc with a soft cloth.
In the event the disc still does not play properly,
eject the disc and allow the condensation to
disappear naturally from the optical parts of
the player. Radio, Auxiliary and USB functions
can still be used during this time which may
take up to an hour.
2. PRECAUTIONS
2. Driving on extremely bumpy roads may cause
the CD to skip.
3. This unit uses a precision mechanism.
Even in the event that trouble arises, never
open the case, disassemble the unit, or
lubricate the rotating parts.
3
DB566USB
6. DCP (Detachable Control Panel)
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (Detachable Control Panel) case to
prevent scratches.
We recommend taking the DCP with you when
leaving the car.
3. Pull the DCP towards you and remove it.
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
2. Insert the left side of the DCP to attach into
the main unit.
The DCP can easily be damaged by impact.
After removing it, be careful not to drop it
or subject it to strong shocks.
If the FLIP DOWN PANEL is kept open, the
DCP may drop due to vibration of the car.
This may result in damage to the DCP. So
close the FLIP DOWN PANEL or remove the
DCP and store in the case.
The connector connecting the main unit and
the DCP is an extremely important part. Be
careful not to damage it by pressing on it
with fingernails, pens, screwdrivers, etc.
CAUTION
!
Removing the DCP
1. Press the [
SRC
] button for 1 second or longer
to switch off the power.
2. Press in the [
RELEASE
] button.
Note:
If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
∗
The DCP is unlocked.
Storing the DCP in the DCP case
Hold the DCP, in the orientation as shown in the
figure below, and put it into the supplied DCP case.
(Ensure the DCP is in the correct orientation.)
8
DB566USB
English
Pastikan untuk membuka lipatan ini dan baca halaman berikutnya.
English
USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE
EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFAC-
TURER WILL VOID THE WARRANTY.
INFORMATION FOR USERS:
CAUTION
!
請務必展開並閱讀下頁
。
གྷఋၗኲၦხኺၪၒཊགྷ
གྷఋၗኲၦხኺၪၒཊགྷ
°√ÿ≥“æ≈‘°ÕË“πÀπÈ“µËÕ‰ª
