22
23
USB Devices
FM Tuner
Frequency range: 87.5–108.0 MHz (Europe)
Usable sensitivity: 8 dB
μ
Frequency response: 30 Hz-15 kHz
Stereo separation: 30 dB (1kHz)
Signal/noise ratio: >55 dB
AM Tuner
Frequency range: 531–1602 kHz
Usable sensitivity (S/N=20 dB): 30 dB
μ
CD
System: Digital Compact Disc audio system
Frequency response: 20 Hz–20 kHz
Signal/noise ratio: >75 dB
Total harmonic distortion: Less than 0.1% (1 kHz)
Channel separation: >60 dB
MP3/WMA mode
MP3 sampling rate: 8 kHz to 48 kHz
MP3 bit rate: 8 kbps to 320 kbps / VBR
WMA bit rate: 8 kbps to 320 kbps
Logical format: ISO9660 level 1,2
Joliet or Romeo
fi
le system
USB
Speci
fi
cation: USB 1.0/2.0
Playable audio format:
MP3(.mp3): MPEG 1/2/Audio Layer-3
WMA(.wma): Ver 7/8/9.1/9.2
Bluetooth
Speci
fi
cation: Bluetooth Ver. 2.0
Pro
fi
le: HFP (Hands-Free Pro
fi
le)
OPP (Object Push Pro
fi
le)
A2DP (Advanced Audio Distribution Pro
fi
le)
Send/Receive Sensitivity: Class 2
Audio Ampli
fi
er
Maximum power output:
160 W (40 W × 4)
Output Power:
4 × 22 W (DIN 45324, +B=14.4 V)
Speaker impedance: 4 (4 to 8 allowable)
7. SPECIFICATIONS
Input
Audio input sensitivity:
High: 0.65 V (at 2 V output)
Mid: 1.3 V (at 2 V output)
Low: 2.0 V (at 2 V output)
(input impedance 10 k or greater)
Aux-in level: 500m V
General
Power supply voltage:
14.4 VDC (10.8 to 15.6 V allowable), negative
ground
Pre-Amp output voltage:
2.0 V (CD play mode: 1 kHz, 0 dB, 10 k load)
Fuse: 15 A
Dimensions of Main Unit:
188 mm Width × 58 mm Height × 190 mm Depth
Weight of Main Unit: 1.42 kg
Dimensions of Remote Control unit:
52.5 mm Width × 7.8 mm Height × 115.5 mm
Depth
Weight of Remote Control Unit:
36 g (including battery)
172 mm
188 mm
58 mm
160 mm
19
m
m
46 mm
50 mm
178 mm
190 mm
Notes:
• Specifications comply with JEITA Stand-
ards.
• Specifications and design are subject to
change without notice for further improve-
ment.
English
Polski
Français
Deutsch
Italiano
Nederlands
Español
Sv
ensk
a
Ελλ
ην
ικός
English
Polski
Français
Deutsch
Italiano
Nederlands
Español
Sv
ensk
a
Ελλ
ην
ικός
Problem
Cause
Measure
USB device cannot be
inserted.
The USB device has
been inserted with wrong
direction.
Reversing the connection direction of the USB
device, try it again.
The USB connector is
broken.
Replace with a new USB device.
USB device is not
recognized.
The USB device is
damaged.
Disconnect the USB device and reconnect. If the
device is still not recognized, try replacing with a
di
ff
erent USB device.
Connectors are loose.
No sound heard with
the display “
No File
”
shown.
No MP3/WMA
fi
le is stored
in the USB device.
Store these
fi
les properly in the USB device.
Sound skips or is
noisy.
MP3/WMA
fi
les are not
encoded properly.
Use MP3/WMA
fi
les encoded properly.
Downloaded from Caradio-Manual.com Manuals
