background image

CJ-981E

15

English

6. TROUBLESHOOTING

In event of a malfunction, check the following symptoms and remedies before calling for professional
repair:

Symptom

Cause

Remedy

No image

Image is dark

Colors are thin

Hues are poor

BRIGHT/DIMMER setting is
adjusted to minimum setting.

BRIGHT/DIMMER setting is
incorrect.

[

CAM1/DIM

] button has

been pressed.

Poor operating environment

Improper color adjustment.

Set BRIGHT/DIMMER adjustment properly. See
section “

Adjusting the Image Quality

” (p. 7).

Check to be sure BRIGHT and DIMMER controls are
adjusted properly.

If the “

DIM

” indicator appears on the screen, hold the

[

CAM1/DIM

] button depressed for about 1 second to

set dimmer to OFF.

This may occur when internal vehicle temperatures
are below 0°C or above 60°C. Adjust vehicle
passenger compartment to an appropriate level
(around 25°C).

Check to be sure HUE and COLOR controls are
adjusted properly.

7. SPECIFICATIONS

Screen Dimensions:

6.5 inch [146.7 (W) x 79.1 (H) mm]

Display Type:

Transmissive TN LCD panel

Drive Method:

TFT (thin-film transistor) active matrix

Display Format:

NTSC/PAL (during VTR mode only)

Resolution:

336,960 pixels

234 (V) x 1440 (H)

Power Supply:

DC 13.2V (10.8V – 15.6V)

Current Consumption:

2.0A or less

Weight:

About 500 g

External Dimensions:

194 (W) x 116 (H) x 28.3 (D) mm

116

25.6

28.3

194

ADJ

POWER

SELECT

IRIS

ZOOM

CAM1/DIM

FUNC

MODE

Summary of Contents for CJ-981E
















Reviews: