Your Safety Tester
11
•
Before beginning the LEAKAGE test press the Leakage Self Test button
on the rear of the tester
•
Press and hold the RUN/LEAKAGE button to start the LEAKAGE test. If
the RUN/LEAKAGE
button is released at any time the test sequence
will abort.
•
The LEAKAGE test should fail Note: the Leakage Self Test button must
be pressed for the full duration of the LEAKAGE test
•
If the LEAKAGE test does not fail, contact Clare Instruments Inc. for
service
Repair and Calibration
Please return with a detailed fault report to:
Clare Instruments U.S. Inc,
6304 Benjamin Road, Suite 506, Tampa, Florida
Telephone: 813 886 2775
Fax: 813 886 2754
Email:
Internet :
www.clareinstruments.com
