18
HDMI 8x8 Matrix Switcher User Guide
If the matrix switch fails to respond to commands on the front panel, ensure
that panel has not been locked via RS232. If the switch fails to respond to
commands from RS232, IR, or front panel, please contact customer service.
Safety operation
To guarantee the reliable operation of the equipment and safety of the staff,
please follow the procedures listed below.
The system must be grounded properly. Do not use two blades plugs.
Ensure the alternating power supply ranges from 100 to 240 V and from 50
to 60 Hz.
Do not locate the device in a place that is abnormally hot or cold or does not
have proper temperature control and ventilation.
The device generates heat when running. Its environment should be well
ventilated to prevent damage caused by overheating.
Disconnect power in humid weather, or when left unused for long periods.
Before making or removing any connections to the device, ensure that the
power supply has been disconnected.
Do not attempt to open the equipment enclosure. Do not attempt any repairs.
There are no user-serviceable parts inside. Any attempt to open the
equipment will result in a complete void of any warranty and may result in
serious injury or death.
Do not splash any chemical substances or liquids on or around the
equipment.
