Clare Controls ClareOne CLR-C1-PNL1, Release Notes

Page: 9 / 10

DOC ID - 1896
• Rev 01 • DRAFT 00.08
9 / 10
a. Tap Set Installer PIN , and then enter the desired 5-digit PIN.
b. Verify the PIN, and then tap Next .
You are returned to the Set PIN page.
c. Tap Set Master PIN , and then enter the desired 4-digit PIN.
d. Verify the PIN, and then tap Next .
You are returned to the Set PIN page.
e. Tap Next to continue the wizard.
8. Run any desired diagnostic tests, and then tap Next .
Note: Once installation is complete test the panel and sensors. See ClareOne
Wireless Security and Smart Home Panel User Manual (DOC ID 1871).
9. Add desired Z-Wave devices to the panel.
a. Tap Start .
b. Connect to the project using the Clare mobile app.
For full device addition and configuration, see the ClareHome App
Guide (DOC ID 1750) .
10. Tap Finish .
For full panel configuration and use, see ClareOne Wireless Security and Smart
Home Panel User Manual (DOC ID 1871).