7
Install
Step 2
Preparing The Video Doorbell
For Wall Mounting
Remove the faceplate attached to the
video doorbell to access the mounting
holes used for installation. Refer to
diagram 1 on how to easily remove
the faceplate.
When mounting the doorbell to brick,
concrete, or stucco, use the supplied drill
template as a guide to mark the locations
for installing the supplied wall anchors.
Using the included masonry drill bit, drill a
hole for each anchor and firmly press each
anchor into the wall.
Note:
If installing the doorbell into siding or wood,
disregard this step and continue to Install Step 3.
Diagram 1
Diagram 2
