Clare Controls 1.3 MP Budget Mini Bullet Camera, User Manual

Page: 15 / 28

9
Figure 2: Wiring over LAN
To set the IP address of the camera for accessing via LAN:
1. To get the IP address, use the SADP. It can automatically
detect the network camera in the LAN. It also lists device
information like IP address, subnet mask, port number,
device serial number, and device version, shown in the
figure below.
2. Change the IP address and subnet mask to the same
subnet as of your PC.
After launching the SADP software, it automatically
searches the online devices every 15 seconds from the
subnet where your computer is located. It displays the
total number and information of the searched devices in
the Online Devices interface. The interface displays the
device type, IP address, port number, and gateway.