Step 1: Unzip the storage bag completely and remove
the shelter. Use care not to misplace the instructions
and the stake pouch. It is advised to store your stakes
and pouch in the carry bag until they are needed.
Step 2: Pick the tent up directly from the carry bag and
lay it on the ground
. (Photo 2)
Step 3: With the screen tent
lying down, grab a corner
of the tent on the opposite end from neoprene hub
covers that say "Quickset" and pull it back over the tent
towards the neoprene hub covers. This will expose one
or two of the outer walls and the webbed strap loop on
the hub assembly in the center of the side wall panel.
(Photo 3
and 4
)
Step 4: With the poles on the inside, reach for the
webbed strap loop
at the center of one wall and pull
until the section pops out. Hold the roof line with the
opposite hand. (Photo
s 5 and 6
)
Step 5: Continue around the shelter repeating the
previous step until all wall panels are erect.
This is a 6
sided shelter. So there will be 5 walls that need to be
"popped" open. The last wall is the door wall which
doesn't have a hub or poles on it.
Once all the walls are deployed, simply walk inside and
push up on the two roof hubs so they are popped up.
(Photos 7 and 8)
Step 6: Enter through the door and push up on the
center ceiling hub until the ceiling pops up. (Photo 5)
SET UP INSTRUCTIONS CONTINUED
Photo 2
Photo 3
Photo 4
Photo 5
Photo 6
Photo 7
Photo 8
