Installing the floor on your
Quickset Cabin
1. Attach the Velcro on each corner (6x) so
that the toggle T is on the outside bottom of
the floor assembly. This needs to be done in
each corner to form a "tray" that will prevent
water or mud from coming into your tent.
2. Once the floor "tray" is assembled,
locate one of the hoops sewn into the bottom
corners (doesn't matter which
one you start with) and install the toggle
T through the hoop to hold its position.
NOTE: WHILE THERE ARE TOGGLE T'S AND
HOOPS IN EVERY CORNER, IT'S NOT
NECESSARY TO CONNECT THEM ALL FOR
POSITIONING. ONE OR TWO WILL SUFFICE
3. Next, separate the protective cover from the
Velcro strip that runs around the entire
perimeter of the inside of the screen tent and
tuck the ends of each strip up behind the hub
poles to keep them out of the way.
4. Attach the Velcro from the backside top of
the floor to the strip on the inside of the tent
and work your way around the perimeter of
the screen tent. Once it's all secured, your
installation is complete.
NOTE: WHILE IT IS POSSIBLE TO LEAVE YOUR FLOOR CONNECTED TO THE SCREEN
TENT WHILE YOU COLLAPSE IT FOR TRANSPORT, IT SHOULD BE REMOVED TO
PREVENT ANY UNNECESSARY DAMAGE FROM THE HUB ASSEMBLIES
