5.
FINAL ADJUSTMENTS
:
Adjust trigger paddle height so that the drill’s trigger can be manipulated fully. You
may need to adjust the side to side movement of the vertical bracket to achieve full
depression of the trigger. Once trigger can be fully depressed by trigger linkage and
paddle, tighten both the shoulder bolt going through the trigger paddle on linkage
assembly to the vertical bracket, and the two bolts holding the vertical bracket in place
to the drill plate.
6.
Assembly is now complete and the auger drill plate assembly is ready to accept
whatever auger you’d like to mount on the motor shaft with the supplied M12 socket
head bolt and 5mm allen wrench or wing bolt.
NOTE
: caution should be used if wing bolt is installed as this part will rotate with
shaft. Do not let it catch or snag on clothing.
STEP-2
:
POSITION TRIGGER PLATE DIRECTLY UNDERNEATH
THE ON OFF SWITCH BUTTON AND SECURELY TIGHTEN
SCREW DESIGNATED AS POSTION 2
POSITION 2
SCREW
STEP-1
SECURELY TIGHTEN BRACKET 104681
TO AUGER BODY PLATE
STEP-3
ADJUST LINKAGE HERE AND
TIGHTEN SCREWS
NOTE:
THIS LINK WILL NEED TO
BE REMOVED WHEN USING A
SHORT BODY DRILL.
efweersdvthjyt
