2.
Install Throttle trigger assembly (104679) to
Bracket (104681) using shoulder bolt
(103954), 2 washers (101081) and nut
(101082) as shown.
(DO NOT TIGHTEN SECURELY)
3.
Slide Auger Shaft (104688) from underside of
Auger thru bearing housing. From top side
ofauger slide Spacer (104733) over auger
shaft (104688) and slide retaining ring
(104675) into groove as shown.
(DO NOT TIGHTEN SECURELY)
4.
Place drill in position as shown and
tighten chuck
securely
to auger shaft (104688). Slip U-bolt
(103955) over drill handle and
securely tighten
to bracket (104681) using 2 washers (101081)
and 2 knob handles (103956).
101081
101081
101082
104679
103954
104675
104733
104688
103956
101081
103955
