background image

 

12

Death from asphyxiation may result from use of oxygen depleting heaters.  Open all vents for
fresh air ventilation. 

Injury or death may result from fire if tent fabric is exposed to open flame. 

Tent  fabric  is  not  fireproof.  Fabric  will  burn  with extended  exposure  to  open  flame.  Do not
use open  flame  products  inside  tent.  Tent  fabric  is treated with fire retardant. Application of
any foreign  substance  may  render  the  flame  retardant properties ineffective. 

Night time: exterior reflectors must be visible to reduce risk of collisions. 

This tent is made with flame resistant fabric which meets CPAI-84 specifications. 

 

-   T i p s   f o r   U s e   -  

 

Folding and transporting your Clam Ice Fishing shelter is easy: 

 

Unsnap the spreader pole and lay it in the bottom of the base. 

 

Push the Rapid Pole Slide push buttons and retract each hoop, starting with the porch hoop and working 
towards the middle. Tuck the tent into the base and between the hoops so that no material is left 

hanging on the ground for transport. 

 

Cover with the Travel Cover* (PN 108820-an optional but recommended accessory to help prolong the 
life of your ice shelter). 

 

We recommend the optional Runner Kit* (PN 108995) be mounted to the base of your shelter (NOTE: 
Pulling behind an ATV or snowmobile may result in premature wear of the base). 

 

In windy conditions it is advised to secure your shelter to the ice using Clam’s Ice Anchor Kit (PN 
108064) and Ice Anchor Installation Tool (PN 108348). 

 

Make sure your ice shelter is completely dried out after each use. Store your Ice Shelter in a cool, dry 
place. Keep away from rodents. 

 

*For replacement parts, frequently asked questions, shelter information, and all of your ice fishing needs 
visit our web site at www.clamcorp.com. 

 

-   S a f e t y   I n s t r u c t i o n s   -  

 
Please fully understand and follow all safety instructions as outlined.  Failure to do so could result in 

severe injury or death. 

 

Do not use open flame heaters in your ice shelter. Injury or death may result from fire if tent fabric is 

exposed to open flame. The tent is not fireproof, but the fabric is treated with a fire retardant that meets 

CPAI-84 specifications. Application of any foreign substance may render the flame retardant properties 
ineffective. Ice Armor fabric will melt when contact is made with hot surfaces (i.e., heaters). 

 

Death from asphyxiation may result from use of oxygen depleting heaters. Open all vents for fresh air 
ventilation. 

 

Never leave shelter unattended when set up. 

 

Due to the increase in traffic (snowmobiles, autos, etc.) on area lakes, ice fishing can be hazardous at 

night. If you choose to fish at night or in poor visibility conditions, be sure to take precautions with 

lights or reflectors to show drivers your whereabouts. Night time: exterior reflectors must be visible to 
reduce risk of collisions. 

 

Summary of Contents for 108842















Reviews: