CLAGE
5
EN
Contents
1. Description of appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2. How to use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Temperature setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Venting after maintenance work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3. Troubleshooting and service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4. Product data sheet in accordance with EU regulation 812/2013 814/2013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
The instantaneous water heater DCX / DCX 13 is an electronically con trolled, pressure
resistant water heater for a decentralised water supply to one or more taps.
As soon as you open the hot water tap,the instantaneous water heater switches
on auto matically. When the tap is closed, the appliance automatically switches
off.
Its electronic control regulates the power consumption automatically depending on the
feed temperature and the flow rate, thus reaching the set outlet temperature up to the
appliance’s power limit.
It is also possible to define the outlet temperature by mixing the hot water (55 °C) from
the instantaneous water heater with cold water by the tap. However, energy and water
will be saved when selecting the relative temperature to be used on the display of the
instantaneous water heater, without mixing cold water from the tap.
In case of a low feed temperature and a high flow rate at the same time, it could hap
pen that the preset outlet temperature is not reached which is due to the fact that the
appliance exceeded its capacity. The outlet temperature can be raised by reducing the
water flow at the tap.
It is possible to use the instantaneous water heater in combination with an external
load shedding relay for electronically controlled instantaneous water heaters (refer to
installing instructions).
1. Description of appliance
Note: Carefully read the enclosed safety instructions through in full before using the appliance
and follow them during use!
