US
Basic troubleshooting
The following table indicates a few simple steps that can be taken safely
to address any faults or malfunctions that may occur during normal use of
the watering system.
PRoBLEm
SoLUtIoNS
Timer does not
work (blank
display)
The batteries are dead, or not installed correctly
(For further infor-
mation see “Batteries installation” on page 6).
Timer is working
(backlit display)
but program is
not watering
No water supply: make sure that faucet is on.
Rain sensor tripped
(For further information see “Operation
with Rain Sensor” on page 18).
Check:
- the state of the timer filter, clean it if necessary
(For further
information see “Cleaning and maintenance” on page 21);
- the watering line is properly connected.
Umbrella symbol
blinking: the
timer has re-
ceived no com-
munication from
the RF sensor
for more than
24 hours.
Check:
- the batteries of the RF Rain Sensor are charged (if the LED
of the RF Rain Sensor is blinking red, or not lit, the batteries
are dead);
- the conditions are right for RF communication: make sure
there are no large obstacles between the RF Rain Sensor and
the timer, and that the RF Rain Sensor is positioned no more
than 100 ft. (30 m) from it;
- the RF Rain Sensor is where originally installed.
For further assistance contact Claber Customer Service at 1-800-930-4566
or via email at [email protected].
22
Summary of Contents for 8488 Dual Select
