EASY:
Steering
39
To activate LASER PILOT make
sure it is turned on in CEBIS (1) and
that LASER PILOT is selected (2).
Line up with the crop edge before
pressing the AUTOPILOT button on
the joystick.
To set up the LASER PILOT,
make sure the combine has a
straight edge and is lined up
with the crop.
With
the
engine
running,
threshing engaged the LEDs
on the back of the LASER
PILOT should all be in the
middle.
If the LEDs are up to
1 - too high
2- too low
3- too far right
4 - too far left
To adjust the LASER PILOT
you only need the panel
spanner.
1
2
TIP.
If the LASER PILOT is not steering straight ahead, check the
adjustments in the HOTKEY first.
TIP.
Check the back of the LASER PILOT.
•
5 - adjust up or down and left or right, or clean glass.
•
6 - no crop edge, adjust left or right.
Summary of Contents for TUCANO 400-300
Page 1: ...Information and Basic Field Settings for TUCANO 400 300...
Page 2: ......
Page 13: ...Notes 13...
Page 35: ...Notes 35...
