Cab Control:
HOTKEY
17
The HOTKEY (2) is used to adjust
the more frequently changing
settings on the combine for example
all AUTOCONTOUR settings.
To adjust any of the HOTKEY values
turn the rotary switch (2) and the
HOTKEY dial will appear on CEBIS
which is shown in the picture below.
Turn the dial to select the required
icon to make any adjustments.
After 2 seconds the HOTKEY dial
will disappear from CEBIS and the
settings will be displayed in the
window shown below. To change the
HOTKEY setting value turn switch (4)
either left or right to either increase or
decrease the value.
To remove the adjusted settings from
the window turn the HOTKEY switch
(2) back to the CEBIS (12 o’clock)
position and the previous screen will
be displayed.
1
6
7
4
3
2
5
Summary of Contents for TUCANO 400-300
Page 1: ...Information and Basic Field Settings for TUCANO 400 300...
Page 2: ......
Page 13: ...Notes 13...
Page 35: ...Notes 35...
