manualshive.com logo in svg

Claas MEDION 310, Repair Manual

The Claas MEDION 310 is a versatile and powerful agricultural machine, designed to handle various tasks with ease. For those seeking a comprehensive and detailed guide, our Repair Manual is available for free download at manualshive.com. Access this manual to ensure successful repairs and optimal performance of your Claas MEDION 310.

Share
Download
background image

299 216.0 - RHB MEDION 340 - 310 

0.1.3

Contents

Installing the lower sieves ................................................ 4.4.1
Removing the sieve frame ............................................... 4.4.2
Sieve frame, exploded view ............................................. 4.4.5
Installing the sieve frame ................................................. 4.4.6
Removing the sieve pan  .................................................. 4.4.9
Installing the sieve pan  .................................................. 4.4.12

Preparation floor  .................................................................... 4.5.1

Removing the preparation floor  ....................................... 4.5.1
Preparation floor, exploded view  ..................................... 4.5.5
Installing the preparation floor  ......................................... 4.5.6

Sieve frame linkage  ............................................................... 4.6.1

Removing the 3-D sieve pan control system  ................... 4.6.1
Installing the 3-D sieve pan control system  ..................... 4.6.1
3-D sieve frame suspension and sieve 
pan control system, exploded view .................................. 4.6.2
Adjusting the 3-D sieve pan control system ..................... 4.6.3

Rocker arm drive .................................................................... 4.7.1

Removing the rocker arm drive ........................................ 4.7.1
Rocker arm drive, exploded view ..................................... 4.7.4
Installing the rocker arm drive  ......................................... 4.7.6

Cleaning fan ........................................................................... 4.8.1

Removing the left and right cleaning 
fan bearings ..................................................................... 4.8.1
Self-aligning ball bearing, exploded view  ........................ 4.8.4
Installing the left and right cleaning 
fan bearings ..................................................................... 4.8.4
Removing the centre cleaning fan bearing
(MEDION 340) ................................................................. 4.8.8
Centre cleaning fan bearing, exploded view
(MEDION 340) ................................................................. 4.8.8
Installing the centre cleaning fan bearing
(MEDION 340) ................................................................. 4.8.9
Removing the fan shaft
(MEDION 340) ................................................................. 4.8.9
Installing the fan shaft
(MEDION 340) ............................................................... 4.8.12
Removing the fan rotors
(MEDION 340) ............................................................... 4.8.15
Installing the fan rotors
(MEDION 340) ............................................................... 4.8.16
Removing the fan housing
(MEDION 340) ............................................................... 4.8.17
Installing the fan housing
(MEDION 340) ............................................................... 4.8.18
Removing the wind boards
(MEDION 340) ............................................................... 4.8.20
Installing the wind board
(MEDION 340) ............................................................... 4.8.21
Removing the fan blast reduction kit
(MEDION 340) ............................................................... 4.8.22
Installing the fan blast reduction kit
(MEDION 340) ............................................................... 4.8.23
Removing the fan shaft
(MEDION 330 – 310) ..................................................... 4.8.26
Installing the fan shaft
(MEDION 330 – 310) ..................................................... 4.8.26
Replacing the fan blades
(MEDION 330 – 310) ..................................................... 4.8.27

Removing the fan housing
(MEDION 330 – 310) ....................................................  4.8.28
Installing the fan housing
(MEDION 330 – 310) ....................................................  4.8.30
Removing the wind boards
(MEDION 330 – 310) ....................................................  4.8.31
Installing the wind boards
(MEDION 330 – 310) ....................................................  4.8.32

5. Grain delivery

Returns elevator  ....................................................................  5.1.1

Removing the returns elevator chain  ..............................  5.1.1
Installing the returns elevator chain  ................................  5.1.2
Removing the top returns auger ......................................  5.1.4
Installing the top returns auger ........................................  5.1.6
Removing the returns elevator  ........................................  5.1.8
Disassembling the returns elevator  .................................  5.1.8
Assembling the returns elevator ....................................  5.1.10
Installing the returns elevator  ........................................  5.1.12
Removing the bottom returns auger ..............................  5.1.13
Installing the bottom returns auger ................................  5.1.16
Removing the returns elevator boot  ..............................  5.1.19
Installing the returns elevator boot  ................................  5.1.21

Grain elevator ........................................................................  5.2.1

Removing the grain elevator chain ..................................  5.2.1
Installing the grain elevator chain ....................................  5.2.3
Removing the grain tank filler auger  ...............................  5.2.4
Disassembling the grain tank filler auger 
angle drive .......................................................................  5.2.6
Grain tank filler auger, exploded view  .............................  5.2.9
Assembling the grain tank filler auger 
angle drive .....................................................................  5.2.10
Installing the grain tank filler auger  ...............................  5.2.12
Removing the grain elevator head  ................................  5.2.13
Disassembling the grain elevator head  .........................  5.2.14
Grain elevator head, exploded view  ..............................  5.2.17
Assembling the grain elevator head  ..............................  5.2.18
Installing the grain elevator head  ..................................  5.2.20
Removing the grain elevator shaft  ................................  5.2.21
Installing the grain elevator shaft  ..................................  5.2.22
Removing the grain auger  .............................................  5.2.23
Installing the grain auger  ...............................................  5.2.27
Removing the grain elevator boot  .................................  5.2.30
Installing the grain elevator boot  ...................................  5.2.31

Grain tank unloading  .............................................................  5.3.1

Removing the lateral augers
(MEDION 340 / 330) .......................................................  5.3.1
Installing the lateral augers
(MEDION 340 / 330) .......................................................  5.3.4
Removing the grain tank unloading auger  ......................  5.3.7
Installing the grain tank unloading auger  ......................  5.3.11
Removing the grain tank unloading 
tube auger  .....................................................................  5.3.13
Grain tank unloading tube, exploded view  ....................  5.3.15
Installing the grain tank unloading 
tube auger  .....................................................................  5.3.16
Removing the grain tank unloading tube .......................  5.3.18
Installing the grain tank unloading tube .........................  5.3.19
Replacing the wear ring  ................................................  5.3.21

Find manuals at http://best-manuals.com/search?&s=CLA-2992160

Summary of Contents for MEDION 310




















































Reviews:

No comments

Related manuals for MEDION 310

MAHLE MCX-2 Operation Manual preview
MCX-2
Brand: MAHLE Pages: 21
Rain-Flo Irrigation 2470 Operating Manual preview
2470
Brand: Rain-Flo Irrigation Pages: 20
3M Attest Auto-reader 390 Connectivity Technical Specifications preview
Attest Auto-reader 390
Brand: 3M Pages: 2
3M Attest 390 Quick Reference Manual preview
Attest 390
Brand: 3M Pages: 2
3M Ranger 245 Competency Checklist preview
Ranger 245
Brand: 3M Pages: 2
3M PELTOR WS LiteCom Plus Technical Data Sheet preview
PELTOR WS LiteCom Plus
Brand: 3M Pages: 7
3M Steri-Vac GS Series Site Planning & Installation Manual preview
Steri-Vac GS Series
Brand: 3M Pages: 52
HAMAR LASER L-705 Manual preview
L-705
Brand: HAMAR LASER Pages: 49
Tate Grid User Installation preview
Grid
Brand: Tate Pages: 7
Tate Grid User'S Installation Manual preview
Grid
Brand: Tate Pages: 5
Calivita BioHarmonex BH4 Product Information & User Manual preview
BioHarmonex BH4
Brand: Calivita Pages: 38
CAIRE FreeStyle Manual preview
FreeStyle
Brand: CAIRE Pages: 91
Daktronics Sportsound SSR-200 Quick Start Manual preview
Sportsound SSR-200
Brand: Daktronics Pages: 5
Hantek DPO6000 Series Product Manual preview
DPO6000 Series
Brand: Hantek Pages: 124
Hameg HO720 Installation Manuallines preview
HO720
Brand: Hameg Pages: 10
Taurus HS 100 Assembly Instructions Manual preview
HS 100
Brand: Taurus Pages: 24
Xaoc Devices JENA Operator'S Manual preview
JENA
Brand: Xaoc Devices Pages: 8
Goobay 49873 User Manual preview
49873
Brand: Goobay Pages: 6

Brands by name

Popular brands

Load more brands