Claas MEDION 310, Repair Manual

Page: 19 / 51

299 216.0 - RHB MEDION 340 - 310
1.2.1
Safety rules
SAFETY RULES Important note
The instructions contained in this manual
should be carefully read and observed by all
persons involved with the operation, mainte-
nance and inspection of this machine in order
to prevent accidents. In particular, read the sec-
tion "Safety rules".
The use of spare parts, accessories and ancil-
lary equipment other than genuine CLAAS prod-
ucts or those which have been tested and
approved by CLAAS, may change the specified
design characteristics of this CLAAS machine
or detract from its functional performance, with
a possible adverse effect on the active and/or
passive operational safety of the machine and
its occupational safety standards (accident pre-
vention).
CLAAS is in no way liable for any damage or
personal injury caused through the use of other
than original or approved CLAAS parts, acces-
sories and ancillary equipment.
Technical data, dimensions and weights are
without obligation. CLAAS reserve the right to
make changes subsequently as technical devel-
opments continue. Responsibility for errors or
omissions not accepted.
Front, rear, right and left refer to the direction
of forward travel.