Claas LEXION 570 Montana, Operator'S Manual

Page: 24 / 41

3.3.2
BA LEXION 570 Montana - 0299 767.0
General information
Indicate the machine number of the CLAAS combine
and when the engine, front attachments, cutterbar
and maize picker are concerned, also the respective
serial numbers when ordering spare parts and in
case of technical questions.
This is necessary as otherwise, incorrect spare part
deliveries may result.
Identification plate
The identification plate of the machine is located
on the right hand side above the rear axle.
(Fig. 2)
Machine serial number
The machine serial number is stamped on the engine
frame underneath the operator's platform on the right
hand side of the machine.
(Fig. 3)
Engine serial number
CATERPILLAR C-12
The identification plates showing the engine serial no.
are attached above the turboblower.
(Fig. 4)
2
3
4