Claas LEXION 480, Repair Manual

Page: 808 / 1018

7.21.10
RHB LEXION 480 - 188 678.1
Steering axle
Stub axle, disassembled
1 Steering axle housing
2 Set screw M 12 x 16 DIN 915
3 Hex. bolt M 16 x 1.5 x 80
DIN 960-10.9
4 Steering track arm
5 Lock nut VM 24 x 1.5 DIN 980-8.8
6 Ball joint
Seal
7 Hex. bolt M 8 x 20 DIN 933
Lock washer 8
8 Top cover
9 Needle bushing
10 O-ring
11 Kingpin
12 Stub axle
13 Axial taper roller bearing
14 Bottom cover
(Fig. 28)
Installing the stub axle
Press the needle bushings (9) into the stub axles one
after another, using the special tool (T).
(Fig. 27, 28, 29)
Press in the top needle bushings until the dimension
from the upper stub axle surface to the top needle
bushing is
13 mm .
Press in the bottom needle bushings until the bottom
needle bushing is flush with the bottom stub axle
surface.
(Fig. 30)
28
29
30