Claas ARES 546, Use And Maintenance, Page: 90 / 178

ARES 506-606 - 02.2005 - GB
G.4
MODE SELECTOR
TRAVELLING POSITION (I)
This mode maintains the linkage in high position, the electronic
box preventing any wrong manoeuvres during road transport (red
light on). This position also activates the travel damper via the
transport damper key.
HIGH POSITION (II)
The linkage is positioned during a manoeuvre on the top limit
programmed by the top stop setting keys.
STOP POSITION (III)
This position stops the linkage at any time in its travel (example
opposite: position 54).
Note: Light upward or downward pressure on selector (1)
allows the height of the linkage arms to be precisely
adjusted from the STOP position.
WORKING POSITION (IV)
In this position the linkage arms will descend to the position
chosen for operating the implement.
FAST SOIL ENTRY POSITION (V)
The mode selector on position (V) gives a faster implement soil
entry.
382hsn10
382hsn11