E) Adjustment Tab
The control curve can be completely customised by inserting the required values in the table of the
"Adjustment"
tab.
Using and (standard), or and (reversed), navigate between each of the points on the table. The
currently selected point is filled in red, while other points are not filled.
While on a point, click to change the value.
See below for a detailed explanation of how to use each of the tools to make changes to the standard curve.
"Edit this point ":
Edit the currently selected point. When the cell is highlighted in red, the point is in edit mode. Enter
the adequate values using the arrow keys, and then click to validate the value.
"Add one point":
Click on to add a point on the control curve then edit point
Visit www.cla-valpacific.com for more details. Contact the Factory at [email protected]
21
CLA-VAL VC12
Electronic Controller
