CLA-VAL
e-FlowMeter
Vortex Flow Meter
CLA-VAL
Europe
www.cla-val.ch
20
-
LIN041UE
C 11/20
© Copyright CLA-VAL Europe - Specifications subject to change without notice - no contractual illustrations.
Reduce your waste - Sort your rubbish
6.4 CALIBRATION
According to table from chapter 4.4 « Dimensions », an e-FlowMeter size covers more than 1 valve model. For example, it is
possible to take an e-FlowMeter calibrated for a NGE 80 valve and to recalibrate for a NGE 100 valve. To do this:
1) Start the e-FlowMeter Software and click on "
Calibration
".
2) Select
"
Metric units
", choose size of the e-FlowMeter then the model of the valve, in our case size 1 and NGE 100
then click on "
Write Calibration
":
3) The following message appears:
4) Click on "
OK
", the e-FlowMeter is calibrated.
