SM-A14448-A/2
4. MAINTENANCE AND INSPECTION
16
2019-08-19
4.1 Periodic Inspection
In order to use the product under optimum conditions, perform a periodic inspection two to three times a
year.
4.1.1 Inspection item
Turn off the power before performing items 1, 2, and 3 below.
No.
Inspection item
Inspection method
Action
1
Check that the mounting bolts on the product,
the screws on the terminal block, and the
connectors are not loose.
Looseness check
Tighten the loose parts.
2
Check that there are no scratches and cracks
on the cables.
Visual inspection
Replace the cable.
3
Check that foreign matters are not
accumulating or are not stuck in between the
movable section.
Visual inspection
Clean the parts. Note 1
4
Check that there are no vibrations or
abnormal sounds while the product is
stopped or operated.
Noise inspection
Contact your nearest CKD sales office or
distributor.
5
Check that the power supply voltage is
normal.
Tester
Check the power system and use the product
within the power supply voltage range described
in the Specifications.
Note 1: Use a soft cloth for cleaning and make sure not to leave foreign matters on the movable section.
