SM-A14448-A/2
2. INSTALLATION
10
2019-08-19
2.1 Environment
• Check the environment temperature and atmosphere before using and storing the product.
• Use the product at an ambient temperature between 0°C and 40°C. Ventilate if heat can become
trapped.
• Use the product at an ambient humidity between 35% and 80%. Do not use the product in a place
where condensation occurs.
• Install the product where it is not subjected to direct sunlight and away from a heating element. Also,
avoid dust, corrosive gas, explosive gas, inflammable gas, and combustible material. Chemical
resistance has not been considered for the product.
• Install the actuator on a smooth and flat surface.
• In order to avoid operation fault and damage, do not install the actuator on a surface with dents.
• The controller is set using setting software (S-Tools). Leave a space of 70 mm or more in front of the
controller so that the connector of the connection cable of the PC can be connected and
disconnected.
2.2 Unpacking
•
When carrying and handling the product, use extreme care not to apply impact to the product
(for example, do not drop the product).
•
Do not carry heavy products alone.
•
Place the product horizontally when not in use.
•
Do not stand on the package.
•
In order to prevent deforming the package, do not place heavy objects and objects of which
their load concentrates.
•
When taking the actuator out of the package, hold the actuator body.
•
Do not apply unnecessary force to any part of the actuator.
• Check that the model number ordered and the model number indicated on the product are the same.
• Check the exterior of the product for any damage.
2.2.1 Parts of the product
Parts of the product
Quantity
Actuator
1
Motor cable
1
Encoder cable
1
