4. Network Operation Mode
[SMF-2008-A]
– 4-5 –
4.1.3
Point table setting example
Turning operation using shared table
Table 4.3. NC program, Operation instruction equivalent to G90G105G11A90F3
Table
Description
Set
value
Operation
Shared
table
Instruction
1
Absolute dimension
Movement unit
1
Angle unit
Movement
speed unit
2
Time
n
Instruction
0
Moves to 90 degrees of the absolute coordinate
in 3 sec (the absolute, angle unit and speed unit
set to the shared table are used).
Movement unit
0
Movement
speed unit
0
A code
/P code
90,000
F code
3,000
When the set values of the instruction, movement unit and movement speed unit of
tables 0 to 63 are 0 (initial value), the setting set to the shared table is used. In this case,
the operation descriptions of tables 0 to 63 can be changed only by changing the set
values of the shared table.
If you want to execute an operation different from the shared table, set the set values of
the instruction, movement unit and movement speed unit of tables 0 to 63 to values other
than 0.
Operation not using shared table
Table 4.4. NC program, Operation instruction equivalent to G91G104G11A-50,000F1
Table
Description
Set
value
Operation
Shared
table
Instruction
1
Absolute dimension
Movement unit
1
Angle unit
Movement
speed unit
1
Rotation speed
n
Instruction
5
Moves to the position of −50,000 pulses from
the current position in 1 sec (the instruction,
movement unit and speed unit different from the
shared table are used).
Movement unit
2
Movement
speed unit
2
A code
/P code
-50,000
F code
1,000
