Filter Replacement
Step 5: Test the waters
When the filter is in place, turn the filler’s water source back on.
Then, before re-affixing the shroud to the base, run about two
gallons of water through the filler’s tap to activate the new filter.
Sometimes, water pressure may cause an irregular flow. This is
nothing to worry about and should normalize on its own.
After running enough water through the filler’s spout, re-attach
the shroud to the base of the filler, screwing it back into place.
https://www.youtube.com/watch?v=eBbzgDrQhfw&index=1&list=PLJ1d3m0iNHr
RHfbJZzyDiUol6kopEQ7ZG
14/05/2019
13
