- 12 -
ＥＮ
TIGHTEN THE DRIVE BELT:if the drive belt becomes loose after using
for a period of time,you need to:
(1) Open the motor cover .
(2) Use the 6mm wrench to turn the adjusting
bolt clockwise.
Repeat this procedure until the drive belt is not slippery anymore.
We have one year quality warranty to the products. Within the warranty period, we provide
the FREE replacement parts. If caused by incorrect assembly, incorrect use or change of parts
failures, our company takes no responsibility. You should show our products series no. and
relative pictures or information before getting the warranty.
This treadmill is only for home use, if the problems occurred by commercial used, our
company takes no responsibility.
A correct lubrication of the treadmill with silicon oil or teflon is REALLY IMPORTANT. This
lubrication must be performed regularly depending on each person, even before its first use.
You must preserve the original packaging with its protections, PURCHASE RECEIPT, manual
and components during the guarantee period
VIII.COMMON ERRORS :
ERR OR CODE
REASON
HOW TO SOLVE
E01
A) signal wire not well connected
Re-connect signal wire
signal wire broken
change new signal wire
)
B
E02
A) Over current protection
B) Motor burnt
C) PCB doorgebrand
Change new PCB
Check input voltage
Change new motor
Turn off machine and restart
D) Input voltage too low
Over load protection
E04
turn off machine to have a rest and restart
3
0
E
A) Sudden big current protection
Turn off machine and restart
PCB burnt
Change new PCB
PCB burnt
Change new PCB
)
B
E05
A) Explosion-proof protection
Check input voltage
)
B
C) Motor wire not well connected
Re-connect motor wire
E06
Motor wire not well connected or broken
Re-connect or change new motor wire
Re-put safety key
f
f
o
y
e
k
y
t
e
f
a
S
-
-
-
IX.
WARRANTY
Https://www.LikeSporting.com
