14
8.
Adding the product to your Home Wireless ZigBee Network
STEP 1
Open the front cover, you will see a
5-pin connector.
STEP 2
Plug the CG101UT5 cable into the 5-
pin connector of the product, and
then plug the other end of the
CG101UT5 cable into the mini USB
end of the CG101UTC cable.
STEP 3
Plug the CG101UTC cable into the
USB port of a PC which has been
installed with CityGrow’s “HomeNET
Planner 2” Software.
STEP 4
Refer to the user manual of
“HomeNET Planner 2” Software to
program and set the address of the
product.
